Optical fiber patch cord equipment, optical fiber patch cord management method

Optical fiber patch cord is a commonly used product of optical fiber communication. Although it seems very simple, it is not. The optical fiber patch cord equipment has strict preservation and management means, and only well managed can lay a solid foundation for our network. Based on the performance and maintenance work of the fiber patch cord, we can get the following six methods to improve the flexibility and reliability of the fiber patch cord management:

Fiber-optic patch cord management method

1. Note the bending radius of the optical fiber patch cord. Generally speaking, the bending radius of 1.6mm and 3.0mm can not be less than 3.5cm, while the bending radius can not be less than 10 times its diameter.

2. Do not pull or squeeze the optical fiber patch cords. When installing the fiber patch cord, excessive force may put pressure on the fiber patch cord and the connectors at both its ends, thus affecting its performance. It's worth noting that if you need to use a lot of effort to pull a fiber patch cord, then there may be some problems with this.

3. Route the patch cord according to the path of the optical fiber patch cord. If the existing patch cord length fits the current application, you can reuse the patch cord, but you will still need to remove the patch cord from the fiber frame and reinstall the patch cord in the new path. This is the only way to ensure that the patch cords are not knotted, bent, and squeezed. In order to effectively route the patch cords, there should be a suitable path to be found for the patch cords between the two ports, while avoiding the patch cords from being intertwined and crowded.

4. Managing fiber patch cords in bundles or ties can make the panel look neat, but tying or tying fiber patch cords increases the risk of excessive extrusion. To avoid this problem, you can appropriately "loosen" the fiber patch cord, so that the fiber patch cord can move freely.

5, labeling is a very necessary work, but also one of the most important work of network system administrators. It is necessary to properly label any management point (including the wiring panel) of the network wiring infrastructure, so that the network technical workers can accurately find the beginning and end of the cable.

6. Check the fiber patch cord for physical damage, including indentation and connector damage caused by sudden bending of the sheath.

The management of fiber patch cord can not only increase the reliability and flexibility of fiber network system, but also reduce the operation and maintenance cost of fiber network. Finet focuses on the research and development and sales of optical communication products, and has 15 patents in the field of optical communication, product types over 10,000, including fiber patch cord, MPO / MTP data center, fiber adapter, etc. Finet promises that all products meet international and domestic standards.